The 2" Round Goblet Buff measures about 1 1/2" tall and reaches into small inside radius curves. These buffs have reinforced 1/8" mounting holes and [...]
Backing pads to hold foam pads for detail polising & buffing. Size: 25mm (dia), 1/8" / 3.2mm shank. 15 000 rpm
Fine abrasive for Gold/Silver. Use Canton Buff.
Ideal for taillight refinishing. Great for color action and removing scratches from plastic which require a special compound. Use care to avoid heat [...]
For cutting ferrous metals (iron, steel, stainless). Has fast cutting action. Use with Spiral Buff or Ventilated Flap Buffs.
A wool buffing pad set ideal for final finish polishing. Mop size: 25mm (dia). Max RPM: 15000. Use with pad 25-92563.
A lambswool buffing pad set ideal for final finish polishing. Mop size: 50mm (dia). Max RPM: 15000. Use with pad 25-92563.
Fits any wheel with a 1/2" arbor hole. Can be mounted in most drills and die grinders with 1/4" collet. For best results, do not exceed maximum RPM [...]
An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all buffs. Made of the [...]
An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all buffs. Made of the [...]
An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton [...]
An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton [...]
Natural, woven fiber covered with cotton and spiral sewn. Used for steel, iron and stainless metals. Sisal is fast cutting and agressive. Use with [...]
Long-wearing wheel for coarse buffing and cutting action on all materials. Made from fine-thread count white 100% cotton sheeting with continuous [...]
A wool buffing pad set ideal for final finish polishing. Mop size: 25mm (dia). Max RPM: 15000. Use with pad 25-92563.
Finnish
Swedish
