The 2" Round Goblet Buff measures about 1 1/2" tall and reaches into small inside radius curves. These buffs have reinforced 1/8" mounting holes and [...]
Backing pads to hold foam pads for detail polising & buffing.
Size: 25mm (dia), 1/8" / 3.2mm shank. 15 000 rpm
Fine abrasive for Gold/Silver. Use Canton Buff.
Ideal for taillight refinishing. Great for color action and removing scratches from plastic which require a special compound. Use care to avoid heat [...]
For cutting ferrous metals (iron, steel, stainless). Has fast cutting action. Use with Spiral Buff or Ventilated Flap Buffs.
Fits any wheel with a 1/2" arbor hole. Can be mounted in most drills and die grinders with 1/4" collet. For best results, do not exceed maximum RPM [...]
An extra-soft wheel, recommended for all final coloring operations. This wheel will give you the most brilliant finish of all buffs. Made of the [...]
An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton [...]
Natural, woven fiber covered with cotton and spiral sewn. Used for steel, iron and stainless metals. Sisal is fast cutting and agressive. Use with [...]
Long-wearing wheel for coarse buffing and cutting action on all materials. Made from fine-thread count white 100% cotton sheeting with continuous [...]
8 piece polishing foam pad set: 30mm (dia) x 15mm. 2x Green (coarse), 2x Yellow (medium), 2x Blue (fine) & 2x Red (extra fine). Use with backing pad.
White compound for finishing of all metals. 100 grams.
Keep bare aluminum wheels, diamond plate and more shining without allot of hand labor. The 6" by 3" thick Buffing Ball made from soft Italian viscose [...]
+358 (nolla) 4007 174 34
Copyright © 2020 MVE-Online