Laser

2 kpl gäntolkar, mm och SAE (gänga per tum). För metriska gängor: 0.5mm, 0.6mm, 0.7mm, 0.75mm, 0.8mm, 0.9mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm. För [...]

The Brass gauge is used on the reluctor air gap on electronic ignition systems where non-ferrous blades are required. Metric and imperial. The feeler [...]

Used with circuit testers to guide the probe on to the wire saving injury to fingers etc. Helps prevent injury to fingers. Plastic body. Holds [...]

A set of feeler gauges for measuring ignition points, spark plugs and tappets. • Neat fold away configuration. • Offset for ease of [...]

Mjuk polermopp för vaxning och polering. Används tillsammans med stödskiva (prod. nr. 20-0348).

For all sizes of screwdriver blade up to 6mm. Can also be used on Hex keys | Torx keys | Spline keys etc up to 6mm. Allows the screw to be [...]

Water proof grease for Mini Grease Gun Part No 3999 light grease For precision greasing Use with Mini Grease Gun Part No [...]

Ten blade feeler gauge for automotive use. Suitable for use on ignition points, spark plug gaps and tappets. Sizes: 0.0015 | 0.002 | 0.003 | 0.004 | [...]

A 10 bladed feeler gauge in metric sizes: 0.05-0.80mm. Suitable for use on ignition points, spark plug gaps and tappets. Ten blade feeler gauge [...]

Double ended seal puller. 200mm long with 25mm tapered ends. Manufactured from S45C carbon steel. Time saver. Removes hard to reach seals with [...]

Flexibel stödtrissa i gummi. Diameter 125mm. 6mm fäste för borrmaskin. För polermopp, slipskivor etc.

Two innovative actions in one ratchet. Use as a 3/8"D swivel head ratchet or use as a T-handle ratchet for extra leverage. Aluminium handle with [...]

Liten precisionshammare. För karosseriarbete och montering av lister och clips. Tillverkad i kompositmaterial. Total längd 175mm. Kilens längd [...]

Compression testing on engines can prove difficult if the spark plug sockets are located deep in the engine compartment. Laser Tools compression [...]

C-ringar A7 x 500 st. Galvaniserade, storlek, öppen: 17.47mm, 7mm stängd. Passar till prod. nr. 20-4591 C-rings tång. (C-ring G616 och 16G)